Skip to content

The Chrome extension won't connect or find a post

Fixes for an expired code, a missing HeyLeads mark on posts, and reading that stops.

2 min read · Updated November 18, 2026

The HeyLeads Chrome extension adds a small HeyLeads mark to posts in your feed so you can see who engaged and add them to a list. It only reads. It never likes, comments, connects or messages for you.

Get it from the Chrome Web Store. It works in Chrome and Edge.

#Connect it

  1. Open Settings, Integrations, Chrome extension

  2. Choose Connect the extension

    A one-time code appears. If the extension is installed and this tab is open, it can pick the code up by itself. Otherwise open the extension and enter it.

  3. Look for Extension connected

    It then lists the device under the code.

#If something is wrong

What you seeWhat to do
invalid_or_expired_codeThe code was wrong, already used, older than 10 minutes, or belongs to someone who left the workspace. Choose Connect the extension again and use the new code.
rate_limited while connectingToo many tries in a minute. Wait a minute.
Only members and above can connectA Client (view only) can't connect the extension. Ask an admin to change your role.
It worked, then stoppedThe connection has a limited life, and ends if it isn't used for a few days. Choose Connect the extension again.
No HeyLeads mark on postsCheck the extension is installed and connected, then reload the LinkedIn tab. Posts of unusual kinds can show Not available yet.
Reading stops with a noticeLinkedIn slowed requests, asked you to sign in, or showed a security check. The extension stops on purpose for about an hour. Sign in to LinkedIn, complete any check yourself, wait, and try again.
You hit a limitThe extension reads only a set number of posts a day, to keep your account safe. Try again tomorrow.
Was this article helpful?